ZK VnS series micro drawing instrument

The ZK VnS series micro pull-out tester is mainly suitable for detecting the anchoring force of various anchor rods, steel bars, expansion bolts, and other anchoring components. The testing range is refined and all meet the requirements of the new standard for the pull-out of steel bars with a diameter of 6 to 12. It can be used for anchoring force detection of tie bars

Features

Color high-definition touch screen, supports full screen touch interaction operation, easy to use and efficient;

The load time (F-t) curve and force values are displayed on the same screen, and the detection process data is fully recorded

The loading speed prompt function assists in uniform loading, which is more in line with regulatory requirements

Comes with Bluetooth module, supports connecting to APP for data upload

Meet the standard requirement of holding the load for 5 minutes and reducing the load value by less than 5%

Data peak retention, automatic correction of 10 segment polylines for numerical values

Large capacity memory, capable of storing 4000 pieces of data

Built in large capacity lithium battery, can work continuously for more than 3 days

Adopting overload protection structure, it will not damage the oil cylinder when the no-load exceeds the range, so you can use it with confidence.

According to the standard

GB 50367-2013 "Code for Design of Concrete Structure Reinforcement"

GB 50330-2013 "Technical Code for Building Slope Engineering"

JGJ 120-2012 "Technical Code for Building Foundation Pit Support"

CECS 22:2005 "Technical Code for Rock and Soil Anchor Rod (Cable)"

GB 50007-2011 "Code for Design of Building Foundation"

JGJ 145-2013 "Technical Code for Rear Anchoring of Concrete Structures"

GB 50550-2010 "Code for Acceptance of Construction Quality of Building Structure Reinforcement Engineering"

GB 50203-2011 Code for Acceptance of Construction Quality of Masonry Structures

Technical Indicators

Product Model: HC-V1S； HC-V3S； HC-V5S

Measurement range: 0~10kN; 0~30kN； 0-50kN

Cylinder center hole: 18mm; 18mm； 18mm

Cylinder stroke: 50mm; 50mm； 50mm

Resolution: 0.001kN

Accuracy: ± 1%

Anchor: Φ 6-12

Weight: 2kg manual pump, 2kg hydraulic cylinder, 7kg overall weight