ZK-D10X Electric Adhesive Strength Tester

The ZK-D10X electric bond strength tester is suitable for testing the tensile strength of rivets used in fixed thermal insulation materials for construction projects, the bond strength of wall thermal insulation materials, the bond strength of exterior wall decorative tiles, carbon fiber bond strength, mortar bond strength, as well as the bond strength of coatings and other materials on various board and concrete surfaces

Features

Integrated structure, ultra hard aluminum alloy small body design, single person independent inspection, easy to carry out when going out;

The loading/unloading speed is flexible and adjustable, meeting industry standard requirements

One click loading, automatically stops after the specimen breaks, and records the peak value automatically

The force curve, strength value (MPa), and force value (kN) are displayed on the same screen, and the testing process data is fully recorded

Fixed load detection mode, automatically stops when the preset test force value is reached, and begins to hold the load activity time and calculate the percentage decrease

The 50mm range design is suitable for various working conditions

Accuracy suitable for S sensors, meticulous measurement, data peak retention, and line correction

Low power design, using Panasonic high-capacity lithium batteries, with long working time

Hardware and software dual safety protection device, confirming the safety of the test process and extending the service life of the instrument

Export data to PC through interfaces such as U, support data analysis, and generate detection reports

Bluetooth connection to mobile app, real-time detection and uploading of data to server, supporting server customized data uploading

According to the standard

JGJ 144-2019 "Technical Standard for External Wall Insulation Engineering"

JGJ 110-2017 "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering"

JGJ 126-2015 "Code for Construction and Acceptance of External Wall Decorative Bricks Engineering"

JG/T 158-2013 "Rubber Powder Polystyrene Particle External Wall Insulation System"

GB/T 23445-2009 "Polymer Cement Waterproof (Based on Actual Report) Coating"

GB 50411-2019 "Construction Quality Acceptance Standard for Building Energy saving Engineering"

JC/T 547-2017 "Ceramic Brick Adhesive"

Technical specifications

LCD screen size: 3.2-inch OLED screen (256 * 64 pixels)

Display mode: kN and MPa

Measurement range: 0-10kN

Resolution: 0.001kN

Accuracy level:& Lt; 0.5% F.S (one-to-one S sensor)

Pulling stroke: 50mm

Rising (loading) speed: constant speed 3, 5, 8, 10 mm/min, adjustable in four levels

Or constant force value 250 ± 50 N/s, 29 ± 4 N/s, 96 N/s, adjustable in three levels

Storage capacity: 2000 data

Power supply method: 12V lithium battery

Dimensions: host 164mm × 157mm × 236mm

Total weight: 4.5kg