ZK-D10S Electric Adhesive Strength Tester

The ZK-D10S electric bonding strength tester is suitable for testing the tensile strength of rivets used in fixed insulation materials for construction projects, the bonding strength of wall insulation materials, the bonding strength of exterior wall decorative tiles, carbon fiber bonding strength, mortar bonding strength, as well as the bonding strength of coatings and other materials on various board and concrete surfaces

Features

Lightweight less than 5kg, integrated structure, ultra hard aluminum alloy small body design;

The loading/unloading speed is flexible and adjustable, meeting industry standard requirements

One click loading, automatically stops after the specimen breaks, and records the peak value automatically

The curve, strength value (MPa), and force value (kN) are displayed on the same screen, and the testing process data is fully recorded

Fixed load detection mode, automatically stops when the preset test force value is reached, and the holding time and percentage of decrease are displayed on the same screen

The 50mm large range design is suitable for various testing conditions

Accuracy suitable for S sensors, meticulous measurement, data peak retention, and line correction

Ultra low power consumption design, using Panasonic high-capacity lithium batteries, with long working time

Design of dual safety protection devices for hardware and software, confirming the detection of safety and achieving excellent results, extending the service life of the instrument

Export data through interfaces such as U, customize upper computer software, support data analysis, and generate detection reports

According to the standard

JGJ 144-2019 "Technical Standard for External Wall Insulation Engineering"

JGJ 110-2017 "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering"

JGJ 126-2015 "Construction and Acceptance Specification for External Wall Decorative Bricks Engineering"

JG 158-2013 "Rubber Powder Polystyrene Particle External Wall Insulation System"

GB/T 23445-2009 "Polymer Cement Waterproof (Based on Actual Report) Coating"

GB 50411-2019 "Construction Quality Acceptance Standard for Building Energy saving Engineering"

JC/T 547-2017 "Ceramic Brick Adhesive"

Technical specifications

LCD screen size: 3.2-inch OLED screen (256 * 64 pixels)

Display mode: kN and MPa

Measurement range: 0-10kN

Resolution: 0.001kN

Accuracy level:& amp; Lt; 0.5% F.S (one-to-one S sensor)

Pull stroke: 50mm

Upward (loading) speed: constant speed 3, 5, 8, 10 mm/min, adjustable in four levels

Or constant force value 250 ± 50 N/s, 29 ± 4 N/s, adjustable in two levels

Storage capacity: 2000 data

Power supply method: 12V lithium battery

Dimensions: host 164mm × 157mm × 236mm

Weight: 4.5kg