ZK-GL10 grouting material strength tester

ZK-GL10 Grouting Material Strength Tester Specification Parameters

Application Industry

It is used for testing the physical strength of grouting material in prefabricated concrete grouting ducts or discharge ducts. The hardness value of the grouting surface in the duct is detected by surface hardness method, and the compressive strength of the grouting material is determined based on the correlation between hardness value and strength

Function Features

High definition camera inside the hole, with clear measurement points and easy detection;

Built in strength curve, the estimated strength value can be obtained immediately by bouncing

The integrated design of camera and DL impact device makes operation more convenient

Diversified operation modes of touch screen and buttons

Larger memory, capable of storing over 10000 data

U upgrade, industry standard updates for curve synchronization, and customization for users

According to the standard

DB32/T 3754-2020 "Technical Specification for Inspection of Prefabricated Concrete Structures" Jiangsu Provincial Local Standard

T/CECS 1189-2022 "Inspection Standard for Prefabricated Concrete Structures"

Jiangsu Provincial Local Standard

Technical Indicators

Strength Measurement Range: 40MPa~120MPa

Hardness Measurement Range: 300~700HLDL

Indication Error: ≤ ± 12HLDL

Repeatability of indication: ≤ ± 12HLDL

Data storage: ≥ 10000, system 8GB storage

Display: 1280 * 720

Host size: 236 * 166 * 60mm

Battery capacity: 7.4V 25.2Wh

Camera pixel: 5 million, 1280P HD

Impact energy: 11mJ

Quality: 7.2g

Ball head diameter: 3mm

Ball head hardness: ≥ 1500HV

Diameter: ≤ 6mm